Work preparation before wall cloth construction

  • Detail

Work preparation before wall cloth construction

work preparation before wall cloth construction

before wall cloth construction. What should be done to the wall. After the wall cloth is put on the wall, the wall surface is in the inner layer and cannot be seen directly. If the early treatment is not good, the wall cloth will have mold, hollowing, edge warping and other serious problems after being put on the wall. Therefore, the effect of early treatment of the wall on the wall cloth is inestimable

with the development of wall cloth. It has become a consensus in the industry that the wall must be painted with a base film. How important is the base film? Why should the base film be painted when sticking the wall cloth

1. Prevent moisture leakage, moisture and mildew on the wall

2. Isolate alkaline substances on the wall

3. Solidify the wall to prevent the wall cloth from falling off

4. Cover stains and beautify walls

5. Protect the wall to facilitate construction

6. Water based raw materials are safe and environmentally friendly

there are many kinds of base films on the market, so how do we choose the base film? The choice of base membrane should be based on the nature of the wall. It is easy to crack the wall, soft and powdery wall, alkaline wall. If these walls choose the base membrane improperly, it will directly affect their future use

1. Standard wall: it is flat, dry, firm and stain free, which is suitable for selecting standard base membrane

2. Walls easy to crack and walls with wallpaper changed repeatedly: use diamond base film, which has thick film, high strength, wear resistance, crack resistance and strong resistance

3. Walls with stains or color differences: use a covering base film to reinforce the wall and cover the pollution and color differences to form a solid white wall

4. Soft and powdered walls: use permeable base membrane, cocoa penetrates the putty layer to reach the wall, and strengthen the firmness between the putty powder and the wall, as well as between the putty powder

5. Alkaline wall: use diamond alkali resistant base membrane to penetrate the wall deeply, and the alkali resistant wall protection effect is good

6. Emulsion paint surface: use wall base, which can penetrate the emulsion paint, enhance the firmness between the putty powder and the wall, and form a solid protective film on the surface

in addition to the base film, the auxiliary material of wall cloth also has an important link glue. A few years ago, the mainstream glue slurry and glue powder in the market. Due to its environmental protection, the viscosity of glutinous rice glue is three times that of ordinary glue. Zhuojian has replaced the position of traditional glue and glue powder, and has become the preferred auxiliary material for wall coverings. However, the products on the market are mixed, how to choose high-quality glue

at present, glutinous rice glue, with its strong viscosity and green environmental protection, has gradually replaced the traditional glue powder and mortar and become the mainstream of wall cloth glue. Glutinous rice glue belongs to starch glue, which is the most environmentally friendly wall cloth glue, and it is easy to construct. Its viscosity value is more than three times that of ordinary rubber powder glue. It is suitable for a variety of wall cloths and is the preferred product for household wall cloths

1. Select products with "ten ring certification" and "EU certification" marks to ensure environmental protection

2. Choose products with clear product and manufacturer information, and reject three noes products

3. Choose products with Chinese marks, and the packages in all foreign languages are basically fake imports

4. Choose products without pungent smell, which is safe and assured

the construction of wall cloth should be the last process of hard decoration of the whole house. The beginning of soft decoration should be carried out after the completion of carpentry, painting, water and electricity, plastering and other hardware

1. The floor is installed

2. The skirting line is installed

3. Install the door pocket and door

4. Finish the wood paint

5. Drill the air conditioning hole

6. The hole of curtain hanging rod shall be well drilled

after the construction is completed, some details need to be paid attention to

dry the wall cloth in the shade

after the wall cloth is pasted, the doors and windows should be closed for 2-3 days to dry the wall cloth in the shade. The room that has just been pasted with the wall cloth will be ventilated immediately, which will cause the wall cloth to curl and bulge

prevent cracks

never turn on the heating and air conditioning before the wall cloth is dry, so as to avoid the sharp contraction of the wall cloth causing cracks

moisture proof ventilation

when the air humidity is high, the windows should be closed in time to prevent the invasion of moist air outside the house; When the weather is fine, open the windows in time for ventilation

repair the damage

after the construction, remember to keep the remaining wall cloth and do not throw it away. When the surface of the wall cloth is polluted, the stains cannot be removed, or the wall cloth is damaged, the remaining wall cloth can be used for repair. Note that the repaired wall cloth must be the same batch

cleaning and maintenance

the wall cloth should be cleaned and maintained frequently. Usually clean with wet towel or sponge




Copyright © 2011 JIN SHI